SMOOTH OPERATION: W10195839 Dishwasher Rack Adjuster will allow you to easily change the height of the dishwasher's upper rack. If your rack adjuster is broken/ cracked and makes the adjuster arm keep falling off and unable to adjust rack height, it’s time to replace it with our superior yet affordable!

PERFECT MATCH: W10195839 Rack Adjuster replaces part numbers: #WPW10195839, PS11750092, AP6016799. It is made exactly fit for several models of most top-name brands (Whirlpool, Kenmore, KitchenAid, Jenn-Air, Maytag).

FIT MODELS: [Kenmore] - 66213293K112, 66513042K110, 66513042K116, 66513044K113, 66513209N410, 66513262K113, 66513269K114, 66513964K012, 66513949K015, 66513362K111, 66515049K111, 66514559N610, etc. [KitchenAid] - KUDE20FXBL4, KUDE20FXSS4, KUDE20FXWH4, KUDE20IXBL3, KUDE20IXBL6, KUDS30IXSS6, KUDE40FXBL3, UDE40FXSS2 KUDE40FXBT3, etc. [Jenn-Air] - JDB3600AWX0, JDB3600AWS0, JDB3650AWR1, JDB3600AWP0, JDB3650AWF0, etc. (detailed list below)

SUPERIOR QUALITY: W10195839 Rack Adjuster is made of sturdy ABS plastic with excellent wear resistance and non-cracking construction and contains no BPA material. This ensures Long-lasting performance for daily frequent use - Material safety under high temperatures of dishwasher operation (extreme heat endurance up to 250°F).

EFFORTLESS INSTALLATION: Inexpensive way to fix or repair a dishwasher. It just takes you 2 minutes to install. Pull out the upper rack. Unclip your old rack adjuster from the upper rack, then lower it down so the cutout lines up with its tab, then pull it off. You can easily reinstall with our new part. After installation, try to adjust the rack height to check whether the new adjusters are firmly installed.